About this product

Product Information

Desktop computers have the ability to expand, allowing for potentially faster speed when upgraded. One way to take advantage of that expansion option is to upgrade your desktop with 2GB Kingston ValueRAM DDR3 KVR1333d3N9 PC3-10600 modules. These 240-pin DDR3 KVR1333D3N9/2G feature DIMMs, or Dual In-line Memory Modules, as a form factor. These form factor modules will fit in any standard PC3 or DDR3 motherboard. The memory modules can provide an immediate performance boost for the desktop user. Those who have more than one computer system connected together on a server can take advantage of the RAM's ability to be used on smaller entry-level servers. The more RAM you install, the more bandwidth you need in order to get the data from the RAM to the processor. Certain applications, including photo editing, gaming, and intense documents, will increase bandwidth requirements further. With 10.6 Gigabytes per second of data per channel, this Kingston KVR1333D3N9/2G non-ECC stick provides all the bandwidth you need for data-intensive tasks. The DDR3 2 Gigabyte stick is designed for those who use white box systems, those who integrate systems, and those who purchase memory by specifications. As a result, this piece of hardware is a versatile addition to any desktop setup.These 2GB accessories from Kingston Value are 256Mx and feature 64 bits located on the data buss. The KVR1333D3N9/2G has a Column Access Strobe, or CL, of 9 and does not feature an Error Correcting Code. Take advantage of the power boost that is achieved with the DIMM being conventional memory that is not buffered or registered. The power achieved is 1.5 volts with a frequency of 1333 MHz, and the sticks feature gold contacts. Computer users with larger boards are able to install more than one stick. If you're using more than 4GB, then it will be compatible with a 64-bit operating system. Those using less than 4GB are able to use a 32-bit operating system. The Kingston ValueRAM CL9 KVR1333D3N3/2G module sticks are designed to be easy to use and install. Simply insert the new stick into the open slot on the motherboard. If you're replacing an older stick, lift the previous RAM out of the board's slot and snap the new one in. The entire unit is then ready to be reconnected to the rest of the PC, so you can enjoy faster and better performance right away.The unbuffered Kingston RAM 1333 MHz sticks are available in standard DIMM height, which is 1.18 inches tall, as well as in Very Low Profile format, which is 0.75 inch tall. The standard dimensions of the memory are 6.9 inches by 2.2 inches by 0.5 inches. They are small enough to easily stock several with the rest of your CPU technical gear. They weigh less than half an ounce, so they are extremely light. These attractive module sticks are green, and the gold contacts line the entire bottom of the RAM. Each stick of the DDR3 SDRAM is designed and tested specifically for compatibility with a wide range of hard drive and flash memory setups.