RC Model Vehicles, Toys & Control Line

Get ready for the ultimate fun with the Redcat Racing Shockwave Nitro Powered RC Buggy. The single speed transmission is perfect for those looking to get started in the nitro RC fun. Single speed transmission makes it ideal for those starting out in nitro RC.

3.6mm Lens1000TVL FPV Camera 3.6mm Wide Angle Lens CMOS NTSC PAL for QAV250 MulticopterThis camera keeps 1000TVL resolution and excellent color rendition, supporting 4.5 to 6V operating voltage. The board size is reduced to 25*17.5mm, which can reduce air resistance for FPV aircraft. It is suitable for fixed-wing aircraft and Multirotor like QAV250, which are highly required in voltage and weight.Format: NTSC PAL with one key to switchSensor: CMOSColour: Blackmaterial: metalLens: 3.6mmPower Supply: DC 4.5-6VDefinition: 1000TV LinesView angle: 120degreeSensitive area: 1/2.7 inchSize: 25 x 17.5 x 30mmWeight: 9.5gPackage Including1 * 1000TVL HD CMOS Camera 1 * Cable 1 * ManualNote: Light shooting and different displays may cause the color of the item in the pict.

This RC quadcopter features a 6-axis gyro based on 4 channels to ensure a stable and fast flight. Moreover, it is built with headless mode so as to avoid the difficulty of identifying the head and tail when you start to fly.

Use for 1-8S Lipo/Li-ion/LiMn/Li-Fe battery. We accept.

If the screws are pictured, they are included.

6 axis gyro fly system with the more sensitive of gyro's regulating, more stable and flexible flight. Gyro: Build-in 6 Axis Gyro. Copter Battery: 3.7V 400mA Li-po Build-in Battery x 2. Transmitter Power: 4 x 1.5V AA battery(not included).

Dynamite DYNE1240 Large Scale Safety Kill Switch. Safety Kill Switch Manual – Multilingual (1.2 MB). Kills your 2-cycle gas engine on command, loss of radio signal, low battery, or total battery power loss.

Rear High Mount Flood Light for TRX-4. Direct plug onto slot #5 or #6 on the primary circuit ( require a Y connector to share the plug with the head light or fog light. And it can be turned on / off by the 3rd channel with your TQi transmitter. ).

Tamiya Black C Parts (Bumper), Part No's. 9005164 (0005115 & 9005164 & X9003). 58047: Hot Shot I (Hotshot). 57785: RTR Hotshot. 58062: Hot Shot II (Hotshot 2). 58517: Super Hotshot 2012. Tony's Tamiya Spares.

This is the Sanwa RX-371W Waterproof 3-Channel 2.4GHz FHSS-2 Receiver. The RX-371W is a small, lightweight receiver that is compatible with all Sanwa 2.4GHz FHSS-2 frequency modulation surface transmitters.

If the screws are pictured, they are included.

Tamiya Black Spike Rear Tyres/Tires (2 Pcs.). (Super Gripper - All Weather 16.50-15), Part No's. 9805034 (19805034 & 6215007). Tony's Tamiya Spares. 57741: RTR Hornet. 84389: Fighting Buggy 2014. 58045: Hornet.

You will need to drill a 6.5mm hole for the hose cover and fit the dual water outlet taking note of the following-. This kit is a simple bolt on job that utilizes the original holes and mounting bolts.

Traxxas TRX4 Front/Rear Bumper Light. Direct plug onto slot #11 or #12 on the secondary circuit. Front LED: 6V, 5mm White x 2 with Light Bucket and Bracket. Rear: 6V, 5mm Red x 2with Light Bucket and Bracket.

Tamiya Hornet sticker-decal sheet as per the pics above. Manufacturers are constantly improving products and changes are made without prior notice. The “second item rule “applies.

Tamiya RS-540 Sport Tuned Motor (Brushed), Part No's. 53068 (OP-68). Tamiya 540 motor comparison. Tony's Tamiya Spares. Standard 540. Torque-Tuned Motor. Sport-Tuned Motor. Top speed: 24.3Km/h.

Left and Right Side Dirt Guards (Part # 101799). HPI 1/8 Trophy Truggy Flux (Model 107018). ESC Tray Set (Part # 103676). MORE TRUCK FOR YOUR BUCK Since 2002! What's a kitted product?. Take a look around.

Tamiya Black R Parts (Rear Upper & Lower Suspension Arms), Part No's. 47330: Bigwig 2017. 58057: Bigwig. 58062: Hot Shot II (Hotshot 2). Tony's Tamiya Spares. 58066: Super Sabre. Any currently available 5, 7 or 8 digit part can be specially ordered, subject to 25% deposit.

This is the Traxxas Link TQi Wireless Module. For use with the Traxxas Link app and TQi radio system. Traxxas Link TQi Wireless Module. 1.5x5mm Hex Head Screw. m to 5p. m (M-S). iPad (3rd gen and later).

DJI MAVIC PRO CABLE. Compatible with : DJI MAVIC PRO. Flat Ribbon Cable.

FF02, TB01, TB02, TT01, TL01, WR02, F201, M05, M06, XV-01T, TT02, etc. Tamiya 20T, 21T AV Pinion Gear Set, Part No's. 50356 (SP-356). F101, F102, F103, CC01, DF01, M01, M02, M03, M04, TA01. TA02, TA03.

1:10 Quanum Vandal. Works great and will last (see note above)! 1:10 Carnage. Should fit.

Pulled from my ARTR Boom Racing D110. I have perfect seller rating. God bless.

Carisma M14 F14 EVO Spur Gear 68T CA14033. This is the Standard Spur Gear 68T to fit the M14 range of Carisma Cars. The standard Pinion is 12T and Spur Gear is 68T. They will fit gears of 48dp / 0.5 module.

Tamiya 5mm Shim Set (3 Types/ 10 Pcs. Each), Part No's. 53587 (OP-587). Tony's Tamiya Spares. Any currently available 5, 7 or 8 digit part can be specially ordered, subject to 25% deposit.

Tamiya Masking Tape Refill 6mm Width, 18m Length, Part No. 87033. Tamiya Masking Tape is thin, very strong adhesive tape for modeling use. It even adheres well to uneven surfaces. It's ideal when sharp and crisp lines are required.

If the screws are pictured, they are included.

Guards, Boxes, Hinge Pins, Sway Bars, Roll Bar tower, Chassis braces, Body Mounts etc. If the screws are pictured, they are included.

These are the perfect finishing touch for shelf queen and runner alike. Primarily designed for the Sand Scorcher, but will also fit Monster and Blitzer beetle shells, or any custom build, albeit with your own own custom trimming.

If you're fed up of broken pullstarts and bruised knuckles then this rotostart backplate may be the answer. Like many other rotostart units it takes a standard dogbone (not hex) type starter shaft. Ansmann. 21 . 28.

You will receive a total of 6 pairs of tires in total 12 tires with Inserts.

Color: Brass colorMaterial: Aluminum alloySuitable shaft diameter: 3.175mmTeeth: 12T,13T,14T,15T,16T,Diametral Pitch: 32 DP12T Size: 10.7 * 14mm13T Size: 11.7 * 14mm14T Size: 12.4 * 14mm15T Size: 13.4 * 14mm16T Size: 14 * 14mmPackage List:1 * 32DP 3.175mm 12T Pinion Motor Gear1 * 32DP 3.175mm 13T Pinion Motor Gear1 * 32DP 3.175mm 14T Pinion Motor Gear1 * 32DP 3.175mm 15T Pinion Motor Gear1 * 32DP 3.175mm 16T Pinion Motor GearNote: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm. Brand Unbranded MPN Does not Apply UPC 192090073658 EAN 192090073658 ISBN 192090073658.

Part # YUNQ500117.

This servo is designed for use as a single steering servo in a Truggy, with a massive 20k g of Torque. - High performance digital standard size servo. - High-precision aluminium gears with hard anodizing.

50ml bottle with spray ( can also be brushed on ).

PWM Frequency – 6KHZ. Motor Limit – 19t. If the screws are pictured, they are included.