Other Interface & Add-On Cards

SCSI2SD is an open source project. SD Card Interface Standard SDSC,SDHC, SDXC. Sector size (can also be set via the SCSI MODE SELECT command, as sent by SCSI format utilities). Artificial limits on the SCSI disk size (eg. ).

Assembled Tested & Working Lo-tech ISA CompactFlash Adapter - IDE for 8-Bit PCs! While this card will work in virtually any PC with an ISA slot, it is primarily intended for PCs which do not, or cannot support IDE and have a smaller data bus such as the IBM XT or clones.

SCSI2SD emulator/SSD, version 6, Revision F. Access to the data via USB. The SCSI2SD drives will appear when connected to a PC via USB. This is limited to around 1.2MB/s (USB FS speeds). SCSI Interface.

SCSI2SD is an open source project. Sector size (can also be set via the SCSI MODE SELECT command, as sent by SCSI format utilities). Emulates up to 4 SCSI devices simultaneously. Selectable SCSI ID.

The top 384k is typically reserved for BIOS, leaving the lower 640k available for applications. While this was a nice solution, you must have an application which is aware of how to use type of RAM.

We test all of our preassembled boards, so there may be a little wear on the teeth. Non-assembled PCBs will not have this wear. I don't know any more than their site reveals, so I won't be able to get any deeper than that.

PCI to 2-slot PCMCIA PC Card / Cardbus Front Drive supports any kinds of 3.3V and 5V PCMCIA/Cardbus cards. It shows 2 icons in My Computer and allows Cardbus or PCMCIA card's Hot- Swap without power off system.

SD SDHC MMC Card to 2.5"44 Pin IDE MALE ADAPTER. Compatible with MMC system specification 2.0 . 44-Pin Male IDE To SD Card Adapter. SD card as a standard IDE hard disk. It power from 44-Pin IDE interface.

Plug an SEL-2812 Transceiver into a standard 9-pin serial connector (DB-9). No special mounting is required. SEL fiber-optic products are simple to install. Improved Safety. Item : Fiber Optic Transciever EIA-232 Full Duplex with IRIG-B Reciever.

Ethernet Enabled 4-Port RS-323 Replicator Dock Mode. It allows users to expand two RS-232 ports over Ethernet connection, and it works as a PCIe add-on card operation on any windows based tiny desktop, laptop, or all-in-one system.

You can install the CVPM clip/holder directly on theLSI00291 BBU-BRACKET-05 remote mount board.

Supports ACARD ASK (ACARD SCSI kernel). ACARD / 2SAN Technology. The AEC-6712WM is a high-performance PCI bus master Ultra SCSI-3 adapter and SCSI bus with transfer rate up to 40MB/Sec. AEC-6712WM supports full Feature PCI 32-bit bus master transfer capability including PCI enhanced data transfer commands (133MB/Sec).

Data Link Protocol: Gigabit Ethernet. Manufacturer: HP. Part Number: 394793-B21. Device Type: Network Adapter.

Connects up to 1024 SAS and SATA devices with 16 external 12Gb/s SAS ports. We will resolve the issue.

Using solderless pins the adapter slides onto the back of a Pi Zero GPIO (If a permanent connection is required the adapter can still be soldered to the GPIO header). It's advised to connect the adapter to the Pi Zero before connecting the USB cable to the adapter, once connected the Pi Zero can be powered on/off without issue (to prevent the serial RX/TX pins being connected before the ground pin).

THIS IS A 100% ORIGINAL ONE.

One unit. SKU Number. New, good condition. Good working. Working Condition. What Included.

THIS IS A FACTORY SEALED DUAL PORT LSI 7204EP CHANNEL CARD WITH COPPER CABLES.

QNAP QM2-2P10G1T interface cards/adapter Internal PCIe, RJ-45. Manufacturer: QNAP. PCIe and Lanes: PCIe Gen2 x 4. Dual M.2 2280 PCIe SSD & single-port 10GbE expansion card;. Connector: 2 x M.2 2280 PCIe SSD slots; 1x 10GBASE-T port.

Without requiring any special software, these multi-port device servers can connect up to 8 to 16 or 32 RS-232 serial devices to your network in a matter of minutes. The EDS feature robust defenses to hostile Internet attacks such as denial of service (DoS) and port mapping that could be used to take down your network.

PCI to 2-slot PCMCIA PC Card / Cardbus Front Drive supports any kinds of 3.3V and 5V PCMCIA/Cardbus cards. It shows 2 icons in My Computer and allows Cardbus or PCMCIA card's Hot- Swap without power off system.

Provides up to 850mA of power over USB. Unique flush-mount form factor design. Product Type Adaptor Card. Warranty 2 Years.

Condor 4 Port Serial Card PCI Standard Profile Card. Manufacturer: Condor. 4 Port Serial PCI Adapter. Office Products. Printers & Scanners. Photos are for illustration only, it may differ from the actual item.

The M.2 to U.2 adapter is ideal for IT professionals, system integrators and installers, and enthusiasts who are building or upgrading a server or desktop computer. The M.2 to U.2 adapter works with all desktop PCs and servers that have an available drive bay or a U.2 (SFF-8639) compatible host interface.

Gigabyte Alpine Ridge V2 Dual Thunderbolt 3 Card for H270 Z270 Z370 X299 Series. Gigabyte Alpine Ridge V2 Dual Thunderbolt 3 Card For H270 Z270 Z370 X299 Series 3 Ports Usb-C 40 GB/S DisplayPort 1.2 4K Daisy-Chain Up To 12 Devices.

This is the version of the card with a high stability OCXO oscillator installed. The bc635PCl-U automatically supports both the 3.3V and 5.0V signaling over the PCI bus. Integration of the module is easily facilitated with optional drivers for Windows, Linux or Solaris.

Product Model #: TB31PCIEX16. Product Model # TB31PCIEX16. Manufacturer Part Number: TB31PCIEX16. The Thunderbolt 3 PCIe chassis makes it easy to expand your system with the capabilities you need to work at peak productivity.

Manufacturer: Gigabyte. - Dual Thunderbolt™ 3 Ports (USB Type-C™). Output interface Thunderbolt 3. SKU: GC-ALPINE RIDGE. Host interface PCIe. - Daisy-chain up to 12 Devices (6 devices per port). Internal Yes.

P/N: PEX2PCI4. SKU: PEX2PCI4. MPN: PEX2PCI4. Add four external PCI expansion card slots to a desktop or laptop computer system. Manufacturer: Startech. Product Type: Expansion Chassis. Material: Aluminum, Steel.

Fast Ethernet 10/100, RJ-45 Port. Refurbished Item was removed from a used system and refurbished to make it fully functional. NEW Pulls Item was originally installed in a new system that was scrapped or recycled before it was put into service.

RAID Level Supported : 0, 1, 1E, 10. Target Market : Entry. PCIe Host Interface : PCIe x8 Gen3. Connector Orientation : Side. Keying : PCIe x8 Connector. IO Processor Model : LSI3008. Board Form Factor : Low Profile MD2 Card.

ORACLE SUN SG-XPCIE2FC-QB4-Z 375-3384 NIB PCI Dual Fibre Ch. Ex Module Adapter. We listen and communicate. Condition: New In Box.

T1 Crossover Cable has been custom made, tested and working with WIC-1DSU-T1. Actual cable color varies. We have more than 100 cables.

If you are looking for a through-hole board to use Compact Flash cards, the more simple ISA CompactFlash adapter may be just what you need:Lo-tech ISA XT CF Adapter rev. 3. This sale is for the PCB and CompactFlash socket only.

RAID Level Supported 0, 1, 10, 5, 50, 6, 60. PCIe Host Interface PCIe x8 Gen3. Target Market Full-featured. # of Devices Supported 255. # of Ports External 0. # of Ports Internal 16.

RAID Level Supported 0,1,10. Data Transfer Rate 3 Gb/s. Launch Date Q1'12. Product Condition. # of Ports Internal 8.

HP DL380 G6 DL385 G5P G6 x8 10G Dual Riser Kit 507688-001. Product Type: Riser Card. Compatibility: HP Proliant: DL38X G5p/G6. Product Condition: New Factory Sealed. Green Compliance: Yes. Manufacturer Part Number: 507688-001.

The QNAP QNA series is a cost-effective Thunderbolt 3 to 10GbE adapter that empowers your Mac® or Windows® computers with blazing-fast 10GbE network connectivity using a Thunderbolt 3 type-C port. With the portable QNA series adapter, a 10GbE network can be created between your Thunderbolt 3 computer and another 10GbE-capable device or NAS to facilitate high-speed data transfer for large files and help to streamline collaborative workflows to improve efficiency.

Product Type: Multiport Serial Adapter. Ports Expandability: 8 x 9-pin DB-9 Male RS-232 - Serial, Via Cable (Optional). Number of Ports: 8. Form Factor: Plug-in Card. Manufacturer Part Number: PEX8S952.