Collectible Tools

VERITAS MK.II HONING SYSTEM. Increased range, capacity and accuracy. The guide can easily accommodate chisels or blades from 6 to 72mm wide and up to 13mm thick including spokeshave blades. Works with short blades such as spokeshave blades.

Rosewood handle secured with 2 brass screws. Milled sides, brass adjusting screw and heavy duty 2mm blade. Blade width 50mm. Handle - Primary - Finish: Rosewood. Blade is heavy duty high carbon steel.

Beech handle tight to head, leather strap on end of handle.

Sheffield made straight wood whittling, carving tool, chisel. Sharpen with an oilstone (we have those listed).

2in (50mm) Quangsheng Cap Iron (chipbreaker) to fit No.4 and No.5 bench planes. Supplied complete with cap iron screw to acommodate blades up to 3mm thick.

STANLEY No 79 DOUBLE SIDED REBATE. Made by Stanley. Fitted with good long Stanley blades. Complete with underside fence guide and screws. All in very good, little used condition.

Good order as seen small chip on blade.

Ideally for use with a 2 bar adjustable regulator. For use inside or outside.

New never opened.

Two made by Preston. make Supersized seem small. Get images that.

Auctiva's FREE Counter.

Only the ones with the. 4L60E W/ SHORT SHAFT. These are the tools to remove and install the oil seal that goes around the transmission shift selector where it enters the transmission on the driver side.

MIBRO's 8" Stacking Dado cuts clean edges, square shoulders and flat bottoms. Can make a variety of different cuts, including Dado, Groove, Rabbet, Fillet, and Mortise & Tenon. 8" DADO BLADE SET. Shim widths range from 0.004" to 0.096".

RECORD No 2506 DOUBLE SIDED REBATE. With good long Record blades. Made by Record. Also has the underside guide and screw - often missing!

LARGE RECORD No 07 SS STAYSET. JOINTER TRY PLANE. Made by Record. Fitted with the Record Stay Set cap iron and blade. All in very good condition.

Set x 4 Sheffield made straight, skew, curved and semi curved wood whittling carving tools. To sharpen with an oilstone (we have those listed).

This delightful 10-1/2in (overall length) Quangsheng spokeshave is cast from bronze, with a satin finish, and a T10 cutting iron hardened to RC60-63.

Henry Taylor wood carving tools. Each set comprises of three tools. One curved bevel gouge, one vee bevel gouge and one dual bevel skew gouge.

Both made by Goddard. Two piano tuning tools. Get images that.

Made by Bell & Son of Sheffield. make Supersized seem small. Get images that.

All complete with the 3 Cutters, Depth Rod and Shoe, Underside Guide and Screw. STANLEY No. Made by Stanley. All in very good, little used condition!

French tranchet - no maker's mark. Right handed shoemaker's knife. Sales are final.

12PC PRO WOOD CHISEL CARVING WITH WOODEN CARRY CASE.

Imperial drill stand by Toga. make Supersized seem small. Auctiva's FREE Counter.

Stamped:Dog & Horse-shoe emblem. and reverseSunflower emblem. Original handle and brass ferrule. Tool for finishing heels and soles on leather shoes. Good for use.

Stanley flat Bottomed Spoke Shave, Cleaned and oiled in good used working condition, Please study photos carefully as part of the item description, Any questions/problems please message me before leaving feedback as only to happy to help, Any problems with postage I will provide proof of postage for you to make claim at post office,

A new #91 marking gauge with a roller on one end and a pin on the other end 6 1/2 " long rods bronze head. there is 2nd pin under the screw on the end.

Henry Taylor 'Acorn' Professional Sweep 3705 Carving Gouge - 3/8" (10mm).

STRICTLY AS PICTURED. ATTIC FIND.

25 x 11 x 4.

Veritas Mk.II Honing System 6 - 72mm Plane Irons Wood Chisels Skew Chisels Guide - The main feature of the Veritas Mk.II is its blade registration system squaring and setting the blade in one easy step. - The Mk.II Guide has three bevel angle range configurations: a high angle (25° to 54° in seven increments), standard (15° to 40° in six increments), and a third for back bevels. - The registration jig slides onto the guide body, centering and squaring the blade using an integral fence. - The clamping mechanism registers on the face of the blade and is designed to accept flat and tapered blades, as well as blades with irregular geometry. - The Mk.II features a three-position eccentric roller allowing a micro-bevel to be honed quickly and accurately after only a simple turn of a.

3 x stanley & 2 record no 4 (5 total).

This large 10.5" Hardwood bevel has a polished handle with brass inlay ends. Both professional and DIY use, this bevel is used for marking and transferring angles. Polished hardwood body. Extended : 295mm.

C Whitehouse is the best maker of these tools. Smaller 8" blade, sharp, ready to use. make Supersized seem small.