Car Audio & Video Connectors & Terminals

This will allow you to hook up to (2) 1/0 gauge power or ground wires into a 0 gauge amplifier input. These are made with 100% copper and are designed with an offset stub for ease of installation. These are sold as a pair, so you will receive 2 amplifier connectors with your order as shown in the photo.

Part Number :SSGA104. Output : 4 Gauge hardened solid pin to connect directly to amplifiers, distribution blocks, fuse holders, fused distribution blocks and any other application that accepts a 4 gauge input.

4 AWG TO 8 GA GAUGE AWG Nickel Set Screw (NO CRIMP) POWER REDUCER QTY 2 4 awg to 8 awg reducers no crimping!

Quick Splice Wire Connector Length: Approx. Quick Splice Wire Connector. Use with the male quick disconnect for easy safe splicing into wires. Male Spade Connector Length: Approx. Suitable for the wire: 22-18AWG(Red Connectors).

After installation, connects to the battery only pressing the lever, no tools needed. minimum wire size: 16mm (5/8").

2.8mm Insulating sleeve 20 pieces. 4.8mm Insulating sleeve 20 pieces. 6.3mm Insulating sleeve 20pieces. Quantity: 120pcs. Very convenient and practical. Durable and easy to install. Thickness: 0.5mm.

Includes 134 pieces as follows;. I work hard to provide a complete selection of Posi products at the best price. (4) PTA-18SWIVEL TAP. 134 total pieces plus the upgraded case. Genuine Posi-Tap type ZRTL-IP0626 PRO installer kit with upgraded case.

Stinger Part Numbers: SPT53103 and SPT53303. Example image of dual 0 gauge inputs above. Wire not included. Works with 4 and 8 gauge also. Very heavy duty - Can be used for audio, marine and any under hood wiring.

One piece design,it consists of transparent heat shrinkable sleeve and fluxed solder. Shrink ratio 2:1. Best shrink temperatures: 125°C - 130°C / 257°F - 266°F. Local pick up is not available. after you have paid.

Here we have dual 1/0 to 1/0 offset pin inputs, sold in pairs, includes stainless hardware, fits oversize 1/0 car audio cable.

It can be used for both 12V and 24V lead-acid and lithium-ion batteries. The G7200 is complete with a built-in battery desulfator in order to rejuvenate under-performing batteries. Progressive repair mode for heavily sulfated 12V batteries.

2600 PIECE Non Insulated (Bare) Tinned Copper Connector Kit. 50 B2624 Butt Connector, 26-24 ga. 50 BM1614-157 Male Bullet Connectors, 16-14 ga. 157 tab.

Solder & Rosin. Top Quality Nylon Butt Connectors. Nylon-Insulated Connectors. 12-10 gauge AWG. Car Alarm System. Add to Favorite. Quantity: 1000 Pieces. Color: Yellow.

HCL800 8 ga Butt Splice HCL400 4 ga Butt Splice. HCL600 6 ga, Butt Splice HCL256 2 ga, 5/16"Copper Ring. Seamless - Crimp or Solder. HCL814 8 ga 1/4" Copper Ring HCL414 4 ga,1/4"Copper Ring. HCL856 8 ga, 5/16" Copper Ring HCL456 4 ga, 5/16" Copper Ring.

Sky High Car Audio. -Lazer engraved Sky High Car Audio.

6 AWG 1/4", 5/16", 3/8" 0.27 0.32 0.23 0.54 0.59 1.47. 4 AWG 1/4", 5/16" 0.27 0.37 0.29 0.54 0.61 1.53. 2 AWG 1/4", 5/16", 3/8" 0.27 0.44 0.33 0.65 0.63 1.62. 1 AWG 1/4", 5/16" 0.27 0.46 0.36 0.65 0.63 1.72.

50 HT10310 Hi-Temp 12-10 GA Butt Connector. 50 HT10170 Hi-Temp 16-14 GA Butt Connector. 50 HT10080 Hi-Temp 22-18 GA Butt. • For use with copper wire only. 50 HT10042 Hi-Temp 22-18 GA 5/16 Ring. 50 HT10043 Hi-Temp 22-18 GA 3/8 Ring.

Color and die coded for crimp settings. Provided with nut and bolt.

MADE WITH 3M DUAL WALLED ADHESIVE LINED HEAT SHRINK TUBING. RED 22-18 ga. HEAT SHRINK RINGS #10, 1/4", 5/16" & 3/8" 20 ea. = 80 PCS. HEAT SHRINK BUTTS . ...

6 AWG 1/4", 5/16", 3/8" 0.27 0.32 0.23 0.54 0.59 1.47. 4 AWG 1/4", 5/16" 0.27 0.37 0.29 0.54 0.61 1.53. 2 AWG 1/4", 5/16", 3/8" 0.27 0.44 0.33 0.65 0.63 1.62. 1 AWG 1/4", 5/16" 0.27 0.46 0.36 0.65 0.63 1.72.

Built-in battery desulfator to recover worn-out batteries.

6 AWG 1/4", 5/16", 3/8" 0.27 0.32 0.23 0.54 0.59 1.47. 4 AWG 1/4", 5/16" 0.27 0.37 0.29 0.54 0.61 1.53. 2 AWG 1/4", 5/16", 3/8" 0.27 0.44 0.33 0.65 0.63 1.62. 1 AWG 1/4", 5/16" 0.27 0.46 0.36 0.65 0.63 1.72.

6 AWG 1/4", 5/16", 3/8" 0.27 0.32 0.23 0.54 0.59 1.47. 4 AWG 1/4", 5/16" 0.27 0.37 0.29 0.54 0.61 1.53. 2 AWG 1/4", 5/16", 3/8" 0.27 0.44 0.33 0.65 0.63 1.62. 1 AWG 1/4", 5/16" 0.27 0.46 0.36 0.65 0.63 1.72.

If you do installs on a regular basis this is the kit for you. It literally has everything you need to splice, tap and fuse 26 - 6 gauge wiresincluding a high quality wire stripper cutter pliers! It even includes 7.5 amp fuses!

12" LONG RED and BLACK WIRE HARNESS WITH A 2 PIN SAE CONNECTOR ON EACH END.

100% Oxygen Free Pure Copper Non-Insulated Tubular Lug. Includes black Heat Shrink cover.

Click here to see description.

6 AWG 1/4", 5/16", 3/8" 0.27 0.32 0.23 0.54 0.59 1.47. 4 AWG 1/4", 5/16" 0.27 0.37 0.29 0.54 0.61 1.53. 2 AWG 1/4", 5/16", 3/8" 0.27 0.44 0.33 0.65 0.63 1.62. 1 AWG 1/4", 5/16" 0.27 0.46 0.36 0.65 0.63 1.72.

The butt splice is made from tinned copper for high conductivity and is wrapped in a semi-transparent nylon insulation that holds up to higher temperatures and crimping better than vinyl insulated butt splices.

Stinger Part Numbers: SPT55302 X 2. Outputs: One 1/0 AWG, one 4 AWG, and two 8 AWG. Allen type set screw holds wire securely.

Stinger part numbers: SPT53102 and SPT53303.

Built-in battery desulfator to recover worn-out batteries.

See through nylon finish.

Pricedrightsales was founded in Lincoln Nebraska in 2010 and has continued to grow in size providing great quality products at great prices. This will allow you to hook up to (2) 1/0 gauge power or ground wires into a 0 gauge amplifier input.

•High power connection.

Replaced the older Stinger SPT85302 (Gold). Features One 1/0 Gauge, One 4 Gauge and Two 8 Gauge Outputs. Retains factory connection on GM applications.